Airtrol Components Inc.
Introduction Table of Contents Contact Factory
Contact Local Distributor

The AT-1004 series of low pressure switches is designed for applications where adjustability is not required. Available preset from 1.5 to 17 inches of water column. Applications include liquid level sensing, confirmation of system pressure and footpedal interfacing. Contact an Airtrol Application Engineer with your requirements.

AT-1004 SERIES
CONTACT FORM
Single Pole, Double Throw
TERMINATIONS .187 Quick-Connect
AGENCY COMPLIANCES UL/CSA Approved Microswitch
OPERATING SPEED 25 MSEC
MATERIALS Body ... Polysulfone 1
Diaphragm ... Polyurethane 1
TEMPERATURE RANGE 40° - 150° F (4° - 66° C)
SET-POINT TOLERANCE +/- 10% of setting OR .5" WC, whichever is greater
MAXIMUM OVERPRESSURE Contact Factory
DEADBAND Contact Factory
CURRENT RATING Contact Factory
1 Wetted materials
 
AT-1004 -
-
  
   

SET POINT - INCHES WC

BARB OPTION
B85 = 1/8" ID
Note: Standard Units supplied with 1/16" barb
Ex - AT-1004-12 = preset to 12" WC, with 1/16" barb



Introduction  Table of Contents  Contact Us  Contact Local Distributor  Back to Top

Copyright 2000, Airtrol Components Inc.
.