Airtrol Components Inc.
Introduction Table of Contents Contact Factory
Contact Local Distributor

The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. Nickel plated brass construction provides excellent corrosion resistance, and a clean and bright appearance. Flow control needle has 7 to 8 turns of precision adjustment, and maximum flow approximately equal to a 0.025" orifice. Unique laminar flow design ensures sensitive, repeatable control. Perfect for use in application requiring precision gas metering, and circuit speed or sequencing control.

  • 3 degree Pin Angle
  • Subminiature Size
  • Simple Panel Mount
  • Fine Adjustment, 64 TPI
  • Attractive Finish
  • Barbed Fittings for flexible tubing
OPERATING PRESSURE
Vacuum through 180 psi
MATERIALS Body & Needle... Nickel Plated Brass
Seal... Buna-N (Nitrile)
OP. TEMPERATURE -40 to 200 F (-40 to 93 C)
RECOMMENDED FILTRATION 5 Micron
PANEL MOUNT Thru hole = 5/16" (0.132) diameter
Max. Panel Thickness = 0.15"
 
NV-30-
-
  
   

FITTING
SIZE
2 = 1/16" BARB
4 = 1/8" BARB

ADJUSTMENT
STYLE
S = SCREWDRIVER
K = KNOB




NV-30 SERIES



NV-30 FLOW DATA

PRESSURE ACROSS NEEDLE VALVE

Introduction  Table of Contents  Contact Us  Contact Local Distributor  Back to Top

Copyright 2000, Airtrol Components Inc.
.